Yamaha CRX-N560D Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik Yamaha CRX-N560D. Yamaha CRX-N560D 50 stron. Network cd receiver
Również dla Yamaha CRX-N560D: Procedura aktualizacji oprogramowania sprzętowego (4 strony)

Drukuj stronę

Preparations

Connect speakers or antenna and turn the unit on.

Do not connect the power cable of the unit until you have finished connecting all cables.

Connecting the speakers

Remove the insulation from the end of

the speaker cable to expose the bare

wires.

15 mm (5/8 in.)

Connect the speaker to the unit, as the

illustration shows.

• Prepare speakers and speaker cables separately.

• For connection of the speakers, refer to the

owner's manual supplied with them.

Right speaker

Speaker

cable

• Take care not to allow the bare speaker wires to touch each other or any metal part of the unit. This could damage the

unit and/or the speakers.

• Make sure that left and right (L, R) connections and polarity (red: +, black: -) are correct. If connections are incorrect, the

sound will be unnatural.

• Use speakers of at least 6 Ω impedance.

• You can also connect a subwoofer with built-in amplifier to the unit.

Left speaker

Monaural pin cable

Subwoofer