Yamaha DSP-Z11 Instrukcja aktualizacji oprogramowania sprzętowego - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja aktualizacji oprogramowania sprzętowego dla Odbiornik Yamaha DSP-Z11. Yamaha DSP-Z11 4 stron.

2. Set the

MASTER

and confirm that the AC plug is properly connected to an outlet.

3. While pressing the PROGRAM knob, press (and release) the MASTER ON/OFF button and

then keep depressing the PROGRAM knob until "ADVANCED SETUP" appears on the front

panel display. (Note: the "ADVANCED SETUP" is only displayed for a few seconds, after

which time the speaker impedance setting is displayed. "SPEAKER IMP. 8MIN")

4. Press and hold SPEAKERS B button for about 3 seconds.

"USB FirmUpdate Push SP.B key!" will appear on the front panel display.

5. Insert the USB thumb drive in the USB terminal located on the front panel.

6. To start the firmware update, press the SPEAKERS B button again.

ON/OFF button on the front panel to OFF,

Firmware reprogramming is in progress