Yamaha HTR-5130 Instrukcja obsługi - Strona 39
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik Yamaha HTR-5130. Yamaha HTR-5130 42 stron. Natural sound av receiver
If you use the SLEEP timer of this unit, you can have this unit automatically put in the standby mode after a set period of time.
When you want to go to sleep while enjoying a broadcast or other desired input source, this timer function is helpful.
Notes
The SLEEP timer can be controlled only with the remote control transmitter.
The components on which the SLEEP timer is effective are the sources connected to the SWITCHED AC OUTLET(S) on the rear
panel of this unit.
To set the SLEEP time
1
Press repeatedly to select the desired
SLEEP time.
Indicates the SLEEP time.
Whenever the SLEEP key is pressed, the SLEEP time
will change as follows.
(Minutes)
120
90
The SLEEP timer is off (OFF).
(The state before the SLEEP
key is pressed.)
After a while, the display returns to the indication
displayed before the SLEEP timer was set.
2
The unit will be turned into the standby mode
automatically at the selected SLEEP time.
SETTING THE SLEEP TIMER
SLEEP
SLEEP
CONCERT HALL
Lights up.
60
30
To cancel the selected SLEEP time
Press repeatedly until "SLEEP OFF" appears in the display. (It
will soon disappear and the "SLEEP" indicator will go off from
the display.)
Note
The SLEEP timer setting can also be canceled by putting this
unit into the standby mode with the STANDBY/ON switch on
the front panel (or the POWER
transmitter) or disconnecting the power plug of this unit from
the AC outlet.
SLEEP
/I key on the remote control
39