Yamaha HTR-6230 Instrukcja połączenia - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja połączenia dla Odbiornik Yamaha HTR-6230. Yamaha HTR-6230 2 stron. Hooking up a blu-ray/dvd player

The RX‐V365/HTR‐6230 Receiver does support HDMI Audio Decoding and you will need to run Separate

Audio Cables from the Source to the Receiver to get sound.

Setting up DVD/Blu Ray Player

Optical out from the Blu‐ray/DVD player to receiver CD Optical #3 input. (You will need to reassign the

CD optical input to DVD. See below.)

Changing the Optical input association from CD to DVD

Note: To do this you will need to be in front of the receiver and have the Yamaha receiver remote.

1. Press the AMP button on remote.

2. Press the Menu button on remote to bring up setup menu on the receiver LED screen front panel.

3. Use Arrow down button to scroll to Manual Setup.

4. Press the Enter button to go into Manual Setup.

5 Use Arrow down button to scroll to 2 Input Menu.

6. Press Enter on remote to go into Input Menu, A) Input Assign will come up.

7. Press the Enter button on the remote to enter A) Input Assign.

8. IN (1) (COAXIAL jack): DVD will come up.

9. Use Arrow right button to change that to V‐AUX. (You cannot select a specific item more than once.)

10. Use Arrow down button to scroll to IN (3) (OPTICAL (CD) jack): CD.

11. Use Arrow right button to change that to DVD.

12. Press Menu button on the remote to exit the Menu system.

Now when DVD is selected on the receiver it will look at the CD Optical input for digital audio.