Yamaha R-S500 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik Yamaha R-S500. Yamaha R-S500 10 stron. Electronic drum rack dtx drums

Drukuj stronę
Setting up RS700
1.
Remove the rack from its box and stand it up with the drum trigger module clamp positioned on the right as shown in
Figure 1.
2.
With the rack standing up, loosen the bolts q located on the right and rotate the right leg clockwise from the left until it
comes fully around as shown in Figure 1 Top view.
• The bolts q can be found on the rear of the clamp on the right pillar, which is located behind the left leg.
Left pillar
Drum trigger
2
module clamp
Right leg
3.
Loosen the bolts w located on the left in Figure 2 and rotate the left leg towards you until it is positioned as shown in
Figure 2 Top view.
Bolts w
Drum trigger
module clamp
Left pillar
4.
Tighten the bolts loosened in Steps 2 and 3 above.
4
RS500/RS700 Owner's Manual
Right pillar
Left leg
[Figure 1]
Right pillar
Left leg
3
Right leg
[Figure 2 ]
Right pillar
Left leg
Bolts q
Right leg
Left pillar
[Figure 1 Top view]
Left pillar
3
[Figure 2 Top view]
CAUTION
• The rack may topple over and cause
injury if the left and right legs are
opened any wider than shown in the
figure below. You should not, there-
fore, exceed the dimensions indicated.
Right pillar
2
Left leg
Right pillar
Left leg
Right leg