Yamaha RX-Z9 Katalog produktów - Strona 5
Przeglądaj online lub pobierz pdf Katalog produktów dla Odbiornik Yamaha RX-Z9. Yamaha RX-Z9 44 stron. Digital home theater component, digital sound projector, digital audio server, digital audio terminal, optional speaker system, plasma display monitor, digital cinema projector, digital home theatre receiver, dvd player, dvd changer, home theatre speaker
Drukuj stronęDigital Sound Projection Technology
The YSP-1 applies sophisticated Digital Sound Projection
Technology to precisely control the orientation of the sound by
focusing it into beams. The result is true 5.1-channel surround
sound without the need for extra speakers! With 42 digital
amplifiers driving 40 4cm full-range drivers and two 11cm
woofers, the Digital Sound Projector delivers 120W of total power
with dynamic bass response.
Precisely Focused Beams of Sound
Although it is one component, there are actually
40 small drivers and 2 woofers inside. The delay time
of each driver is controlled by a Digital Sound
Processing circuit, enabling the system to project
"beams" of sound which are precisely aimed for
optimum surround sound
effect. Naturally, high quality
two-channel (stereo) sound can
also be reproduced, as well as
three-channel sound if desired.
Virtual Speaker
Positions
Delay Control
Digital Amplifiers
Speaker Array
Sound is focused
into beams.
Multiple channels (two channels in the figure) are superimposed to
create the sound. In a 5.1-channel configuration, the beam
speakers together create the sound of 5.1 superimposed channels.
Connection
with Display, VCR
VCR
and DVD Player
DVD Player
YSP-1 Rear Panel
The YSP-1 rear panel offers 2 optical/1 coaxial digital and
2 analogue inputs, subwoofer output and RS-232C interface.
Precise Calibration Produces Accurate
Multi-Channel Sound
You input a variety of parameters (once only)
to obtain the correct surround sound field.
First, you select room size (large, medium or
small), room shape (square or rectangular) and
speaker position (wall or corner). You can also
make fine adjustments with precise distances
from the listening position. Test tones are
provided to adjust beam angles via the remote
control for maximum surround effect. If you
will be moving the YSP-1, there are three
memory locations for storing different groups
of settings.
L
L
R
Listening
Position
Even if the YSP-1 cannot
If the room has an alcove
be positioned flat against
or other irregularity, the
the front wall (leaving
settings can be adjusted
"dead" space), the quality
to compensate, so the
of the surround sound
surround enjoyment can
will not be affected.
be assured.
Video Signal
Analogue Signal
Flat Display
Video Signal
Digital Signal
Digital
On-Screen
Signal
Display
Digital Sound Projector
Beam Mode Selection
Five-Beam:
All five
channels—L , R, C, Ls and
Rs—are given separate
orientations. Sound is
beamed off the walls to
create the effect of a
surround system with rear
speakers.
Stereo:
and right woofers, with
the multiple beam
speakers acting as
tweeters, reproduce the
effect of conventional
stereo speakers.
Three-Beam:
channels are produced
using stereo mode while C,
R
Ls and Rs are produced
using beaming. This mode
is effective when the
YSP-1 placed in a corner.
Listening
Position
Three-Beam:
are produced: L+ Ls, R+ Rs
and C. A surround sound
effect is created by
reflecting the sound off
the walls.
Main Specifications
• Speakers Section : 40 x 4cm beam drivers,
2 x 11cm woofers • Digital Amplifier : 120 W total
power: 40 x 2 W x 40 + 20 W x 2
• Dimensions (W x H x D): 1,030 x 194 x 118 mm
• Weight: 13 kg
Option
Analogue
Signal
SPM-K1
Sound is projected at the
listener from five directions:
straight ahead, reflected off one
wall, and reflected off two walls
(so it is heard from the rear).
Five Beam Mode
The left
Stereo Mode
Stereo +
The L and R
Stereo + Three Beam Mode
Three beams
Three Beam Mode
Wall Hanging Bracket
5