Yamaha A-S2000 - Amplifier Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Yamaha A-S2000 - Amplifier. Yamaha A-S2000 - Amplifier 43 stron.
Również dla Yamaha A-S2000 - Amplifier: Instrukcja obsługi (35 strony), Instrukcja obsługi (34 strony)

Yamaha A-S2000 - Amplifier Instrukcja obsługi
TREBLE
BALANCE
-
+
L

3 PHONES jack

Outputs audio for private listening with headphones.
Note
When headphones are plugged in:
– Both speaker sets connected to the SPEAKERS L/R CH A
and B terminals are turned off.
– No signals are output at the PRE OUT jacks, while signals are
output at the REC jacks.
– You cannot select MAIN DIRECT as the input source.
– If headphones are plugged into the PHONES jack while
MAIN DIRECT is selected as the input source, no audio is
output at the PHONES jack.
4 TRIM
Adjusts the volume level when headphones are plugged in
to avoid sudden changes in volume.
Choices: –6 dB, 0 dB, +6 dB, +12 dB
INPUT
CD BAL
LINE 1
CD
LINE 2
MAIN DIRECT
R
PHONO
AUDIO MUTE
MM
MC
VOLUME
TUNER
PHONO
5 SPEAKERS
Turns on or off the speaker set connected to the
SPEAKERS L/R CH A and/or B terminals on the rear
panel.
• Switch to the OFF position to turn off both speaker
sets.
• Switch to the A or B position to turn on the speaker set
connected to the SPEAKERS L/R CH A or B
terminals.
• Switch to the A+B BI-WIRING position to turn on
both speaker sets.
Caution
If you use two sets (A and B), the impedance of each speaker
must be 8
or higher.
7
En