Yamaha AG-Stomp Instrukcja obsługi - Strona 25
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Yamaha AG-Stomp. Yamaha AG-Stomp 32 stron. Yamaha accoustic guitar/pre-amplifier owner's manual
Również dla Yamaha AG-Stomp: Instrukcja serwisowa (45 strony), Lista poprawek (1 strony), (holenderski) Podręcznik (32 strony)
Press the [LIMITER] button to set the receiving MIDI
PRG No. Use the [UP]/[DOWN] buttons to select
the number.
1
128
•
-
: MIDI Program Change No.
Press the [FR 1] button to set the AG-Stomp's patch
number. Just as in selecting a patch number in the
Play Mode, use the [UP]/[DOWN] buttons or the
Footswitches to select.
U01
U93
P01
P93
•
-
,
-
The patch number that is recalled.
G Create a MIDI Program Change Transmit Table
When a Footswitch (1-3) is pressed to recall a patch,
a MIDI Program Change Number can be transmit-
ted from the AG-Stomp's MIDI OUT jack to control
an external effector, etc., from the AG-Stomp.
This table assigns to the patch, a MIDI PRG No.
that will be transmitted when the patch is recalled.
Press the [FR 2] button to set the AG-Stomp's patch
number. Just as in selecting a patch number in the
Play Mode, use the [UP]/[DOWN] buttons or the
Footswitches to select.
U01
U93
P01
P93
•
-
,
-
The patch number that is recalled.
Press the [FR 3] button to set the PRG. No. that will
be transmitted. Use the [UP]/[DOWN] buttons to set.
1
128
•
-
: MIDI Program Change No.
G Set the MIDI Receive Channel
Sets the AG-Stomp's MIDI Receive Channel. The
MIDI channel set in this step is also used as the
device number for the bulk receive function.
Press the [FR 4] button and use the [UP]/[DOWN]
buttons to set the MIDI receive channel.
oFF
•
: MIDI messages are not received
ALL
•
: MIDI messages from all channels are
received
1
16
•
-
: MIDI channel over which messages are
received.
G Set the MIDI Transmit Channel
Sets the AG-Stomp's MIDI Transmit Channel. The
MIDI channel set in this step is also used as the
device number for the bulk out function.
Press the [FR 5] button and use the [UP]/[DOWN]
buttons to set the MIDI transmit channel.
1
16
•
-
: MIDI channel over which messages are
transmitted.
:
:
G ON/OFF setting for MIDI Merge
Sets whether or not the MIDI signal that is received
via the AG-Stomp's MIDI IN jack will also be trans-
mitted via the MIDI OUT jack.
Press the [CHORUS] button and use the [UP]/
[DOWN] buttons to set the merge setting.
on
•
: Data is retransmitted via the MIDI OUT
jack.
oFF
•
: Data is not retransmitted via the MIDI
OUT jack.
* When the merge function is set to on, data retransmitted via
the MIDI OUT jack is not confined to the channel set in the
MIDI Receive Channel setting so all data from all channels
will be transmitted.
G MIDI Bulk Out
This operation transmits data stored in the AG-
Stomp's USER AREA as well as Utility Mode set-
tings to an external device, such as the YAMAHA
MDF3, etc., which can be used to store MIDI data
for back up.
Use a MIDI cable to connect the AG-Stomp's MIDI
OUT jack to the MIDI IN jack of an external MIDI
device.
MIDI
OUT
To send all USER AREA data (
Utility Settings with the Bulk Out Operation
Press the [DELAY] button ("
display), then press the [STORE] button to carry out
the MIDI Bulk Out operation.
To send a single USER AREA patch (data) with
the Bulk Out operation
After pressing the [HALL] button, select the patch
number to Bulk Out. Just as in selecting a patch
number in the Play Mode, use the [UP]/[DOWN]
buttons or the Footswitches to select the patch. Af-
ter selecting the patch, press the [STORE] button to
Utility Mode
MIDI
IN
MDF3, etc.
U01
U93
-
) and
ALL
" will appear in the
25