Yamaha AX-10 Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Yamaha AX-10. Yamaha AX-10 13 stron. Natural sound stereo integrated amplifier
Również dla Yamaha AX-10: Instrukcja obsługi (6 strony), Instrukcja obsługi (6 strony)

Drukuj stronę

SPECIFICATIONS

Minimum RMS Output Power per Channel

8 ohms, 20 Hz to 20 kHz, 0.03% THD ...................70W+70W

6 ohms, 20 Hz to 20 kHz, 0.06% THD ...................80W+80W

Dynamic Power per Channel

(by IHF Dynamic Headroom measuring method)

8/6/4/2 ohms.............................................95/117/140/200W

DIN Standard Output Power per Channel

(4 ohms, 1 kHz, 0.7% THD)

[Europe model only]....................................................100W

IEC Power (8 ohms, 1 kHz, 0.03% THD)

[Europe model only]......................................................77W

Power Band Width

8 ohms, 35W, 0.03% THD..........................10 Hz to 40 kHz

Damping Factor

8 ohms, 20 Hz–20 kHz...................................................150

Input Sensitivity/Impedance

PHONO MM............................................2.5 mV/47 k-ohms

CD/TUNER/TAPE/AUX ...........................150 mV/47 k-ohms

MAIN IN ......................................................1.0V/10 k-ohms

Maximum Input Signal (1 kHz, 0.005% THD)

PHONO MM .............................................................120 mV

Output Level/Impedance

REC OUT ..............................................150 mV/2.6 k-ohms

PRE OUT....................................................1.0V/1.5 k-ohms

Headphone Jack Rated Output/ Impedance

Output Level (8 ohms, 1 kHz, 0.03% THD) .................0.47V

Impedance ............................................................390 ohms

Frequency Response (20 Hz to 20 kHz)

CD/TUNER/TAPE/AUX...........................................0±0.5 dB

MAIN IN .................................................................0±0.5 dB

RIAA Equalization Deviation (20 Hz to 20 kHz)

PHONO MM ..........................................................0±0.5 dB

Total Harmonic Distortion (20 Hz to 20 kHz)

PHONO MM to REC OUT (3V) ................................0.005%

CD/TUNER/TAPE/AUX to PRE OUT (1V) ................0.008%

CD/TUNER/TAPE/AUX to SP OUT (35W/8 ohms)....0.025%

Signal-to-Noise Ratio (IHF-A Network)

PHONO MM (5 mV Input Shorted)............................. 88 dB

CD (PURE DIRECT: ON)........................................... 110 dB

Residual Noise (IHF-A Network)

CD (PURE DIRECT: ON)............................................. 50 V

Channel Separation (Vol. –30 dB)

PHONO MM/MC (Input Shorted 1 kHz/10 kHz)63 dB/52 dB

CD/TUNER/TAPE/AUX (Input 5.1 k-ohms Terminated

1 kHz/10 kHz) ...................................................65 dB/50 dB

Tone Control Characteristics

BASS: Boost/cut ..........................................±10 dB (20 Hz)

TREBLE: Boost/cut ....................................±10 dB (20 kHz)

Gain Tracking Error (0 – –60dB)........................................3 dB

Power Supply

[U.K. model] ................................................AC 240V, 50 Hz

[Europe model]............................................AC 230V, 50 Hz

[General model] ................AC 110/120/220/240V, 50/60 Hz

Power Consumption ........................................................170W

AC Outlets

SWITCHED OUTLETS ...............................100W max. total

Dimensions (W x H x D) .....................280 x 118.5 x 388.5 mm

Weight ......................................................8.2 kg (18 lbs. 1 oz.)

Accessories ....................................Remote control transmitter

Specifications subject to change without notice.

(11" x 4-11/16" x 15-5/16")

Batteries