Yamaha AX-330e Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Yamaha AX-330e. Yamaha AX-330e 8 stron. Natural sound stereo integrated amplifier
Również dla Yamaha AX-330e: Instrukcja obsługi (9 strony)
Drukuj stronę
® Normal listening operation
h
—
Turn the volume control to the minimum
level
before turning the power ON. The power indicator
is illuminated.
. Select the desired program source using the IN-
PUT SELECTOR.
Activate your chosen component.
Adjust your VOLUME, BASS, TREBLE and BAL-
ANCE to provide the desired sound quality.
To record from a program source
. Turn the volume control to the minimum setting
then press the power switch (to the ON position).
The power indicator lights up.
. Select the desired program source using the IN-
PUT SELECTOR.
Ensure the Tape Monitor is OFF.
. Activate the source program component.
. Advance the volume control to a suitable level.
. Commence recording by activating the tape deck
- connected to the Tape jacks.
. The recording can be monitored through the
speakers or headphones. If the tape deck has 3
head monitoring capability the just recorded
signal can be monitored by depressing the Tape
Monitor switch.
Before assuming that your unit is faulty, please check the following troubleshooting list which details the correcti\
action you can take yourself without having to call a service engineer. If you have any doubts or questions, contac
your nearest Yamaha dealer.
Power is not supplied even
though the Power switch is
turned on.
The power plug is not securely plugged
Plug it in securely.
In.
There is nosound with any input
selector switches pressed.
The Speakers switch is not set correctly.
| Set the Speakers switch correctly.
The input cords are not connected se-
Connect them securely.
curely.
.
The speaker system is not connected
Check and secure connections.
correcily.
The Tape Monitor is ON.
Push the Tape Monitor switch to th
OFF position.
There is no sound from one
Secure the connections.
speaker.
The speaker connections are not secure.
The Balance control is set all the way to
the left or right.
Adjust the Balance control cor-
rectly.
There is a lack of bass and no
ambience.
The + and — cords have been reversed
at the amp or speakers.
Connect the speaker wires in the
correct phase (+ and —}.
There is a humming sound
when playing records.
The input cords are not connected se-
curely.
Plug the input cords in securely.
The turntable's ground wire is not con-
nected.
Connect the ground wire.
There is a howling sound when
playing records at high volume.
The turntable and the speakers are too
close together or the turntable is not
mounted on a firm surface.
Change the location of the turntabl
or the speakers.
Driving speakers outside the rated impe-
dance range at high power for an extended
period has activated the speaker pro-
tection circuit.
Turning this unit off and then on wi
reset the speaker protection circui
Use speakers inside the rated im-
pedance range.
The sound suddenly goes off.
There is a malfunction in the amplifier.
Consult your Yamaha dealer.