Yamaha AX-390 Instrukcja obsługi - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Yamaha AX-390. Yamaha AX-390 14 stron. Natural sound stereo integrated amplifier
Również dla Yamaha AX-390: Instrukcja serwisowa (37 strony)
Drukuj stronę
SPECIFICATIONS
AUDIO SECTION
Minimum RMS Output Power per Channel
8 ohms, 20 Hz to 20 kHz, 0.04% THD ....................60W+60W
6 ohms, 20 Hz to 20 kHz, 0.04% THD ....................65W+65W
Maximum Output Power
6 ohms, 1 kHz, 10% THD
[General model only].............................................95W+95W
Dynamic Power per Channel
(by IHF Dynamic Headroom measuring method)
8/6/4/2 ohms..................................................80/95/115/125W
DIN Standard Output Power per Channel
4 ohms, 1 kHz, 0.7% THD
[Europe model only] .......................................................90W
IEC Power
8 ohms, 1 kHz, 0.04% THD
[Europe model only] .......................................................75W
Power Band Width
8 ohms, 25W, 0.08% THD..............................10 Hz to 40 kHz
Damping Factor
8 ohms, 20 Hz to 20 kHz ......................................100 or more
Input Sensitivity/Impedance
PHONO MM................................................2.5 mV/47 k-ohms
CD/TUNER/TAPE/AUX ..............................150 mV/47 k-ohms
Maximum Input Signal (1 kHz, 0.04% THD)
PHONO MM ..................................................................90 mV
Output Level/Impedance
REC OUT..................................................150 mV/0.6 k-ohms
Headphone Jack Rated Output/Impedance
Output Level (8 ohms, 0.04% THD) ...............................0.42V
Impedance ...............................................................390 ohms
Frequency Response (20 Hz to 20 kHz)
CD/TUNER/TAPE/AUX ..............................................0±0.5 dB
RIAA Equalization Deviation
PHONO MM ..............................................................0±0.5 dB
Total Harmonic Distortion
PHONO MM to REC OUT
20 Hz to 20 kHz, 1V.....................................................0.02%
CD/TUNER/TAPE/AUX to SP OUT
20 Hz to 20 kHz, 30W/8 ohms.....................................0.02%
Signal-to-Noise Ratio (IHF-A Network)
PHONO MM to REC OUT
(5 mV Input Shorted) ....................................................82 dB
CD/TUNER/TAPE/AUX to SP OUT
(Input Shorted, CD DIRECT ON/OFF)...........108 dB/102 dB
Residual Noise (IHF-A Network, CD DIRECT ON/OFF)
.............................................................................50 µV/140 V
Channel Separation (Vol. –30 dB)
PHONO MM (Input Shorted, 1 kHz) ...............................65 dB
CD/TUNER/TAPE/AUX
(Input 5.1 k-ohms Terminated, 1 kHz)..........................60 dB
Tone Control Characteristics
BASS: Boost/cut..............................................±10 dB (20 Hz)
Turnover Frequency.......................................(350 Hz)
TREBLE: Boost/cut ........................................±10 dB (20 kHz)
Turnover Frequency ..................................(3.5 kHz)
Continuous Loudness Control .............................– 30 dB (1 kHz)
GENERAL
Power Supply
[U.S.A. and Canada models]..........................AC 120V, 60 Hz
[Europe and U.K. models] ..............................AC 230V, 50 Hz
[General model]....................AC 110/120/220/240V, 50/60 Hz
Power Consumption
[Europe model] ...............................................................130W
[U.K. and General models] .............................................150W
AC Outlets
3 SWITCHED OUTLETS
[Europe and General models]......................100W max. total
1 SWITCHED OUTLET
[U.K. model] .................................................100W max. total
Dimensions (W x H x D) ............................435 x 146 x 309 mm
Weight ..............................................................................7.3 kg
Accessories .....................................Remote control transmitter
Specifications are subject to change without notice.
(Level related equalization)
Batteries
13