Yamaha XMV4280-D Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Yamaha XMV4280-D. Yamaha XMV4280-D 42 stron. Power amplifier
Również dla Yamaha XMV4280-D: Instrukcja obsługi (43 strony)

Drukuj stronę

Thank you for your purchase of the Yamaha XMV4280, XMV4140, XMV4280-D or XMV4140-D power

amplifier. Please read through this manual carefully before beginning use, so that you will be able to take full

advantage of your power amplifier's superlative features and enjoy trouble-free operation for years to come.

After you have read the manual, keep it in a safe place for reference when needed.

NOTE

• When there are differences in the specifications of the XMV4280/XMV4280-D and the XMV4140/XMV4140-D, this manual will

use curly brackets { } to enclose information that applies only to the XMV4140/XMV4140-D.

(Example: 280W {140W}).

• Unless otherwise specified, illustrations are taken from the XMV4280/XMV4280-D.

• For the remainder of this manual, the XMV4280, XMV4140, XMV4280-D and XMV4140-D are referred to as "XMV" collectively.

• In this book, the matrix processor MTX series units are reffered to as "MTX" collectively.

Features

The XMV is a multi-channel power amplifier with the follow-

ing features.

• Both high-impedance and low-impedance connec-

tions are supported

Both high-impedance connections to 70V/100V lines and

4Ω/8Ω low-impedance connections are supported. A rear

panel DIP switch allows this setting to be specified for every

two channels.

• Newly-developed "Double Power mode"

The newly-developed "Double Power mode" doubles the

amplifier output of each channel when low-impedance con-

nections are used.

* The number of available channels will be halved.

• Settings can be made via application software

Although settings such as mute on/off and attenuator values

can be edited from the panel of the amplifier itself, you can

use an MTX series matrix processor and computer to edit the

settings of multiple XMV units.

• Support for the newly-developed "YDIF" digital

audio transmission format

(XMV4280/XMV4140 only)

This allows up to 16 channels of audio and word clock to be

transmitted and received via an Ethernet cable.

This model can receive four channels of audio signals via

YDIF.

• Dante network for large-scale systems

(XMV4280-D/XMV4140-D only)

This enables audio signal transfer over long-distance with

Dante equipped devices (such as the MTX5-D) with stan-

dard Ethernet cables.

• High efficiency

The newly-developed output circuits allows high efficiency.

Introduction

Included items

• Owner's Manual

• Power cord

• Euroblock plugs (3-pin, 3.50mm pitch) x 2

• Euroblock plugs with tabs (3-pin, 5.08mm pitch) x 4

• Cable ties x 4

Related Manuals and Software

You can easily configure a complete sound system featuring the

XMV by connecting it to MTX series matrix processors or to

MTX Editor system configuration software. The owner's man-

ual for the MTX and for MTX Editor, and MTX Editor itself

(subsequently referred to as "the editor") can be downloaded

from the download page of the following website.

http://www.yamahaproaudio.com/

• List of related manuals

MTX3 Owner's

Manual

MTX5-D Owner's

Manual

MTX Editor User's

Manual

MTX Setup Manual

The "MTX Editor User's Manual" and "MTX Setup Manual"

are electronic files in PDF format.

You can read the books on a computer. Use Adobe® Reader®

to read the books on screen, search for words very quickly, print

specific pages, or click links to display sections of special inter-

est. The ability to search for words, or to follow links directly to

relevant sections in the document, are helpful attributes of this

electronic file format. We encourage you to take advantage of

these benefits.

You can download the latest Adobe Reader application from the

website listed below.

XMV4280/XMV4140/XMV4280-D/XMV4140-D Owner's Manual

(please check)

This explains how to use the MTX3

matrix processor.

This explains how to use the MTX5-D

matrix processor.

This explains how to use MTX Editor.

This explains how to use and set up

the matrix processor MTX series that

is used along with the XMV power

amp.

http://www.adobe.com/