Yamaha Electone HS-7 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System głośników Yamaha Electone HS-7. Yamaha Electone HS-7 20 stron. Serie hs monitor da studio alimentato e subwoofer alimentato
Również dla Yamaha Electone HS-7: Instrukcja obsługi (20 strony), Instrukcja obsługi (21 strony), Instrukcja obsługi (20 strony), Instrukcja obsługi (20 strony), Instrukcja obsługi (20 strony), Instrukcja obsługi (20 strony), Instrukcja obsługi (20 strony), Instrukcja obsługi (20 strony), Instrukcja obsługi (20 strony), Instrukcja obsługi (20 strony), Instrukcja serwisowa (43 strony), (Angielski) Instrukcja obsługi (20 strony)

Drukuj stronę
Yamaha Electone HS-7 Instrukcja obsługi
 Recommended cables
 For connection to a balanced XLR input.
 For connection to an unbalanced phone jack input.
NOTE Refer to "Connection and Cable Types" on page 14 for more
connector details. The configurations of the balanced and
unbalanced phone jack connectors are different.
Connecting to a Synthesizer or
Other Electronic Musical Instrument
When connecting an electronic musical instrument
such as a Yamaha MOTIF synthesizer to the HS series
speakers, connect the instrument's L/MONO and R
outputs to the HS speaker inputs.
HS8/HS7/HS5
OUTPUT L/MONO
 Recommended cables
 For connection to an unbalanced phone jack input.
10
HS8/HS7/HS5/HS8S Owner's Manual
HS8/HS7/HS5
HS8/HS7/HS5
HS8/HS7/HS5
OUTPUT R
HS8/HS7/HS5
NOTE Refer to "Connection and Cable Types" on page 14 for more
connector details. The configurations of the balanced and
unbalanced phone jack connectors are different.
Setting Up for Superior
Sound
A number of points should be observed when laying out
a monitor speaker system.
1.5 meters or more
1.5
meters
or more
 Point 1
Position speakers at least 1.5 meters away from
walls or corners.
Ideally, the speakers should be located at least 1.5
meters away from walls or corners. In situations where it
is not possible to position the speakers a sufficient
distance from walls or corners, the ROOM CONTROL
switch can be used compensate for excessive bass. As
you move the speaker closer to walls or corners, a
higher compensation setting may be required to
achieve natural sounding response ([0] → [-2] → [-4]).
60˚