Ecoplus 728340 Podręcznik użytkownika - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Pompa wodna Ecoplus 728340. Ecoplus 728340 12 stron. Fixed flow pumps
USAGE CAUTIONS:
A. Before operating pump:
1. Check that the power voltage and frequency conforms to the power ratings on the nameplate.
2. Don't lift, lower or carry pump by the power cable.
3. Always unplug the pump when not in use. Do not place hands in water where the pump is
installed or before performing any maintenance and cleaning.
4. Do not add any lubricants to the pump.
5. Do not operate the pump without water as this will cause severe damage.
5. This pump is not self-priming. Make sure the water lines and pump(s) are filled with water
prior to turning on.
6. Do not install or store the pump where it will be exposed to weather or temperatures
below freezing.
7. Do not operate pump in water temperatures higher than 86º F.
B. The pump should not be used if:
1. Do not operate pump if the power supply cord, plug or any other parts have any damage.
2. If cord is damaged, pump should not be used and disposed of properly.
3. Pump has a wet plug or a wet receptacle.
4. Water discharge from pump is reduced.
5. A part is broken and water leaks in.
6. Anything abnormal occurs.
7. If people or body parts are in the water.
C. During pump operation:
1. Shut off power immediately to prevent motor from burning out when overloaded due
to clogging from foreign materials.
2. Please consult store where you purchased the pump or EcoPlususa.com if the pump
is not working properly. DO NOT disassemble or assemble the pump, as this may result
in severe damage.
A "Drip Loop" prevents the plug or electrical outlet from getting wet and should be set up
for each cord connecting the pump to an electrical outlet (see diagram below). The Drip
Loop itself is the part of the cord below the level of the outlet (or connector if an extension
cord is used). This prevents any water from traveling along the cord and coming into
contact with the outlet!
Plug
Outlet
ALWAYS SET UP A DRIP LOOP
DRIP
LOOP
2
Power cord to pump