Directechs DB3 Instrukcja obsługi - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria samochodowe Directechs DB3. Directechs DB3 17 stron. 2011 subaru outback - 403.subaru2 1.25
Również dla Directechs DB3: Instrukcja instalacji (20 strony), Instrukcja instalacji (19 strony), Instrukcja instalacji (19 strony), Instrukcja instalacji (20 strony), Instrukcja instalacji (10 strony)

Drukuj stronę

Quick Reference Guide (customer copy)

Sending commands to your vehicle

Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, there

are 3 possible ways you can send commands to your vehicle, using the:

• Factory remote.

• Aftermarket remote.

• Directed SmartStart application via your smartphone.

If applicable, you can also start the engine remotely by pressing the Lock button 3 times

quickly on your factory remote.

Vehicle takeover with Get In and Go

Close the vehicle doors, hood and trunk, then press the

Remote Start button on the transmitter to start the vehicle.*

Press the Unlock button on the factory or aftermarket

remote.*

Complete the following steps within 45 seconds or the vehicle will shut down.

Enter the vehicle, while making sure the factory remote is

inside with you.

Depress the brake pedal for a minimum of 3 seconds, then

put the car in gear and drive off.

* Icon and remote appearance may differ depending on the model purchased.

Get In and Go

Get In and Go is designed to provide users with easy takeover when entering their Push-to-Start

(PTS) equipped vehicle, once it has been remote started.

Typically, users would have to remote start their vehicle, then get inside and press the PTS button

to perform a takeover. There is therefore a physical action required to drive away. With Get In

and Go, you simply remote start the vehicle, unlock the doors, get in and go... All that's left to do

is put the gear in drive and drive off.

403.MA3 2.42.104 2014 Mazda 3 (Smart Key)

Pit stop/idle mode

Stop the vehicle in a safe parking spot and put the gear

in Park (P).

Press the Remote Start button on the transmitter.*

The parking lights will flash once to indicate the vehicle is

now in Pit Stop Mode.

It is safe to leave the engine running and exit the vehicle

with the factory remote in hand.

Note: We recommend that you always lock the doors of

Press Remote

your vehicle when leaving it unattended.

Start button*

* Icon and remote appearance may differ depending on the model purchased.

Press Unlock on

either remote*

Remote Start Ready (RSR)

Enter

vehicle

14:36

with

remote

3x OEM Lock Remote Start Activation

Ready

to drive

This solution includes the option to remote start your vehicle by pressing the Lock button

off

3 times consecutively. If your vehicle allows the OEM remote to remain active while the

engine is running, you may shut down your remote starter by pressing the Lock button 3

times once more.

Note: The range offered by OEM remotes is limited and typically requires you to be within

eyesight of the vehicle to control it.

14:36

Remote Start Ready (RSR) is a function that enables the interface module

to remote start the vehicle completely on its own. Consequently, there is

no need for an aftermarket or an OEM remote starter in order to start the

vehicle from a distance.

Put

gear in Park

Parking lights

Press

flash x1

Remote

Start

button*

14:36

Exit

vehicle

with

remote