Clark Synthesis TACTILE SOUND TST329 Instrukcja instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Przetwornik Clark Synthesis TACTILE SOUND TST329. Clark Synthesis TACTILE SOUND TST329 20 stron. Platinum, gold, silver and all weather transducers
Również dla Clark Synthesis TACTILE SOUND TST329: Arkusz danych (1 strony)

Drukuj stronę

1. Supplied Parts

Supplied Parts

SUPPLIED PARTS (ILLUSTRATED BELOW)

A. (1) TST209 Transducer

B. (1) Unimount Bracket

C. (1) 3/8"-16 x 3" Hanger Bolt

D. (1) 3/8"-16 x 3" Threaded Stud

E. (1) 3/8"-16 x 1.5" Threaded Stud

F. (1) 3/8"-16 x 1" Hex Bolt

G. (4) #12 x 1" Screw

H. (2) 3/8" Jam Nut

I. (4) #12 Washer

J. (4) #12 Lock Washer

K. (1) 3/8" Washer

L. (1) 3/8" Lock Washer

M. (1) T-Nut

• Installation Guide

Tactile Sound Transducers

REQUIRED TOOLS AND MATERIALS

Depending on your application, you will need

some or all of these tools and materials for your

installation:

• #2 Phillips Screwdriver

• (2) 9/16" Open-Ended Wrenches

• Drill

• Saw

• Wire Stripper

• Soldering Gun or Wire Nuts

• Adhesive (construction glue)

• Hardwood (oak, maple, ash, etc., not pine or

softwoods) for creating mounting bridges

• Speaker Cable (min. 16 AWG; 12-14 AWG

recommended)

Side View

3-D View

Front View