Caliber RMD 571 Podręcznik użytkownika - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Samochodowy system wideo Caliber RMD 571. Caliber RMD 571 17 stron.
Również dla Caliber RMD 571: Skrócona instrukcja obsługi (8 strony)
Drukuj stronę
9 9
3. TUNE/SEEK UP/DOWN BUTTONS
In RADIO mode:
1) Long press the >>| or |<< button to automatically search up or down for a
available station from the current frequency.
2) Briefly press the >>| or |<< button to manually search up or down with step
by step for your desired station from the current frequency.
4. APS BUTTON
In RADIO mode:
1) When long pressing the APS button, the radio searches from the lowest
frequency and checks the signal strength level until 1 cycle search is finished.
And then the 6 strongest stations are preset to the corresponding preset
number memory bank. The AS operation is implemented in each bank of the
selected band. When the AS operation is finished, it will scan each preset station
for 5 seconds in FM or MW band from M1 when APS button is pressed briefly.
After the scanning is finished, broadcasting will resume on the M1.(It can store
3x6 stations for FM and 2x6 stations for MW)
2) When pressing the APS button briefly, the radio will scan each preset station
for 5 seconds in FM or MW band from M1.
After finishing a circle of scanning, it will resume broadcasting on the M1.
NOTE: In FM band, FM1,FM2,FM3 is checked one at a time; In MW band,
MW1, MW2 is checked one at a time.
5. PRESET STATION [ 1-6 ] BUTTONS
In RADIO mode:
1) To memorize the current frequency on the current band, long press any of the
number buttons (1-6) on remote control or on the front panel .
2) To recall the preset memory on the current band, briefly press one of the preset
buttons [1-6] on remote control or on the front panel.
6. STEREO/MONO BUTTON
Press the ST button on the remote control to select the STEREO or MONO
sound mode for FM band.
7. LOC BUTTON
1) In RADIO mode, when the signal of the distance radio station are very weak
and the receiving effect is bad during tuning. If there is the word LOC on the
monitor, press this button to turn off the LOC function, then tune again for the
distance radio station;
2) In RADIO mode, when the signal of the local radio stations are too strong and
the interference does no t allow the tuner to lock on stations, press this button
to turn on the LOC function to display the word LOC on the monitor, then tune
again for the local radio stations.
8. PTY (PROGRAM TYPE) BUTTON
Press the PTY button shortly to select one of the following mode:
PTY MUSIC group- - PTY SPEECH group -- OFF