ACOPOWER HY-COMBO-X30A+X200A Skrócona instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Zamrażarka ACOPOWER HY-COMBO-X30A+X200A. ACOPOWER HY-COMBO-X30A+X200A 8 stron. Rechargeable solar fridge freezer
Drukuj stronę
Next, let's show you how to operate LiONCooler using just the battery without plugging into a wall
outlet.
battery into the cooler and unplug all other cords. You're now in 'cordless mode'. Turn the battery
power button ON (yellow light) then turn the LiONCooler power button ON (LED control panel on
top of the cooler). You're all set to go! Now that you're in 'cordless mode', LiONCooler will run for as
long as the battery lasts (usually 10+ hrs at fridge temperatures; less if freezing).
- see TIP below for recharging your battery.
Turn ON the LiONCooler.
Plug in the AC power cord to a wall outlet. The power button is located on the control panel on top
of the cooler. Press and hold the power button on the cooler for about 3 seconds. The LED display
will illuminate.
TIP:
In order to recharge the battery, the battery must be switched on (yellow light) and the cooler
plugged into a wall outlet. You only really need to turn the battery ON when you are 'going mobile' i.e.
have no access to a wall outlet OR you need to recharge the battery. Batteries can also be recharged
when removed from the cooler by using an external power pack (available as a separate accessory
separately).
STEP 2. Fridge or Freeze Temperature Settings:
When the LiONCooler is powered ON and running, press + or - button on the control panel to adjust
the temperature you want. After that, the control panel will display the current inside temperature
of the cooler. Don't worry. The display will gradually change until the cooler reaches your desired
temperature. It's a good idea to pre-chill the fridge and food/drinks before setting out on a trip. Just
treat it like the fridge in your kitchen.
Temperature setting range: -4℉～68℉（-20℃ ～ +20℃）