Clarke CHG 1500B Instrukcja obsługi i konserwacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Elektronarzędzie Clarke CHG 1500B. Clarke CHG 1500B 7 stron. Hot air gun

SAFETY PRECAUTIONS

GENERAL SAFETY PRECAUTIONS F3OR POWER TOOLS

As with all power tools and machinery, there are certain hazards involved with

their operation and use. Exercising respect and caution

will considerably lessen the risk of personal injury. However, if normal safety

precautions are overlooked or ignored, personal injury to the operator or

1. READ and BECOME FAMILIAR with the entire operating manual. Learn the

machines' applications, limitations and the specific potential hazards peculiar

to it.

2. EARTH ALL TOOLS. If the tool/machine is equipped with three-pin plug, it should

be plugged into a three-pin socket. Never remove the earth pin.

3. ALWAYS ensure that ADEQUATE LIGHTING is available. A minimum intensity

of 300 lux should be provided. Ensure that lighting is placed so that you will

not be working in your own shadow.

4. CHECK for DAMAGE. Before using the tool/machine, any damaged part should

be checked to ensure that it will operate properly and perform its intended

function. Check for alignment of moving parts, breakage of parts,

mountings and any other condition that may affect the machines' operation.

Any damage should be properly repaired or the part replaced. If in doubt,

DO NOT USE the machine. Consult your local dealer.

5. DISCONNECT the TOOL/MACHINE from the power supply before servicing and

when changing accessories.

6. ALWAYS WEAR SAFETY GOGGLES manufactured to the latest European Safety

Standards. Everyday eyeglasses do not have impact resistant lenses, they are

NOT safety glasses.

7. KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

8. DON'T FORCE the machine. It will do a better and safer job at the rate for

which it was designed.

9. ALWAYS use a face or dust mask if operation is particularly dusty.

10. DRUGS, ALCOHOL, MEDICATION. Do not operate tool/machine while under

the influence of drugs, alcohol or any medication.

11. USE RECOMMENDED ACCESSORIES. The use of improper accessories could

be hazardous.

12. NEVER LEAVE MACHINE RUNNING UNATTENDED. Turn power OFF. Do not leave

the machine until it comes to a complete stop.

WARNING:

damage to property, may result.

/ MACHINERY