Zanussi ZBB27650SA Podręcznik użytkownika - Strona 14

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Lodówka Zanussi ZBB27650SA. Zanussi ZBB27650SA 20 stron.

Ventilation requirements
The airflow behind the
appliance must be
sufficient.
Installing the appliance
Caution! Make sure that the mains cable
can move freely.
Do the following steps:
x
1
If necessary cut
the adhesive sealing
strip and then apply it
to the appliance as
shown in figure.
14
6 cm
min. 200cm
x
2
Install the appli-
ance in the niche.
Push the appliance in
the direction of the ar-
rows (1) until the up-
per gap cover stops
against the kitchen
furniture.
Push the appliance in
the direction of the ar-
rows (2) against the
cupboard on the op-
posite side of the
hinge.
2
4mm
min.
44mm
200cm
2
3
Adjust the appli-
ance in the niche.
Make sure that the
distance between the
appliance and the
cupboard front-edge
is 44 mm.
The lower hinge cov-
er (in the accessories
bag) makes sure that
2
the distance between
the appliance and the
kitchen furniture is
1
correct.
Open the door. Put
the lower hinge cover
in position.
5
Remove the cor-
rect part from the
hinge cover (E). Make
sure to remove the
part DX, in the case
of right hinge, SX in
opposite case.
I
I
4
Attach the appli-
ance to the niche with
4 screws.
C
D
E
E
B
6
Attach the covers
(C, D) to the lugs and
the hinge holes.
Install the vent grille
(B).
Attach the hinge cov-
ers (E) to the hinge.
www.zanussi.com