Zanussi ZC 246 R3 Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Lodówka Zanussi ZC 246 R3. Zanussi ZC 246 R3 14 stron. Fridge zc246r3

Drukuj stronę

Before using the appliance for the first time, wash

the interior and all internal accessories with luke-

warm water and some neutral soap so as to remove

the typical smell of a brand-new product, then dry

thoroughly.

Insert the plug into the wall socket.

Open the refrigerator door and turn the thermostat

knob, clockwise, beyond the «O» (STOP) position.

The appliance will start to operate.

To stop operation, simply turn the thermostat knob to

position «O»

The temperature is automatically regulated and can

be increased to achieve a higher temperature

(warmer) by rotating the thermostat knob toward

lower settings or reduced (colder) rotating the knob

towards higher settings.

However, the exact setting should be chosen

keeping in mind that the temperature inside the

refrigerator depends on:

•

room temperature;

•

how often the door is opened;

•

the quantity of food stored;

•

location of appliance.

To obtain the best performance:

•

do not store warm food or evaporating liquids in

the refrigerator;

•

do cover or wrap the food, particularly if it has a

strong flavour.

•

Position food so that air can circulate freely round

it.

To reverse the door, proceed as follows:

1. Remove the lower hinge (1) and the foot (2);

2. unscrew the left front foot and reposition on the

opposite side;

3. unscrew the two screws which mask the holes for

fixing the hinge from the left front side;

4. slide the door out from pin (G),unscrew the pin

and reposition on the opposite side;

5. reassemble the door;

6. Re-assemble the lower hinge (1) and the foot (2)

on the opposite side, as shown in the figure;

7. Unscrew the handle. Refit it on the opposite side

after having pierced the plugs with a punch.

Cover the holes left open with the plugs supplied

in the documentation pack.

D162/1