Zanussi ZC245P Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Lodówka Zanussi ZC245P. Zanussi ZC245P 9 stron. Fridge zc245p

CUSTOMER SERVICE AND SPARE PARTS

If the appliance is not functioning properly, check

that:

the plug is firmly in the wall socket and the mains

power switch is on;

there is an electricity supply (find out by plugging

in another appliance);

the thermostat knob is in the correct position.

If there are water drops on the bottom of the

cabinet, check that the defrost water drain

opening is not obstructed (see ÒDefrostingÓ

section).

The appliance should be installed well away from

sources of heat such as radiators, boilers, direct

sunlight etc. Best performance is obtained with

ambient temperature between

+18¡C and +43¡C(class T);

+18¡C and +38¡C (class ST);

+16¡C and +32¡C (class N);

+10¡C and +32¡C (class SN).

The class of your appliance is shown on its

rating plate.

Ensure that air can circulate freely around the back

of the cabinet. To ensure best performance, if the

appliance is positioned below an overhanging wall

unit, the minimum distance between the top of the

cabinet and the wall unit must be at least 100 mm

(A). Ideally, however, the appliance should not be

positioned below overhanging wall units (B).

Accurate levelling is ensured by one or more

adjustable feet at the base of the cabinet.

If your appliance is still not working properly after

making the above checks, contact the nearest

service centre.

To obtain fast service, it is essential that when you

apply for it you specify the model and serial number

of your appliance which can be found on the

guarantee certificate or on the rating plate located

inside the appliance, on the bottom left-hand side.

NP006