Zanussi ZFC 140 T Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Lodówka Zanussi ZFC 140 T. Zanussi ZFC 140 T 10 stron. Refrigerators zft 140; zfc 140 t

Building the appliance in under a

worktop

This appliance can also be built in under the worktop

of your kitchen units. To do this, proceed as follows

(Fig. 2):

remove screws which secure the top to the rear

brackets and front hinges;

move the top slightly to release it from the retainers

and remove it;

unscrew the screws securing the rear feet to the

cabinet;

remove the 3 mm shim from the feet and reﬁt them;

screw in the front feet to obtain the required height.

Important

For the appliance to function properly, an opening of at

least 137 cm

(Fig. 3) must be cut in the kitchen

worktop.

A minimum clearance must also be provided between

the condenser and the wall, as shown in the Fig. 4.

Before plugging in, ensure that the voltage and

frequency shown on the serial number plate

correspond to your domestic power supply.

Voltage can vary by 6% of the rated voltage.

For operation with different voltages, a suitably sized

auto-transformer must be used.

The technical data is indicated in the rating plate on the left side inside the appliance.

TECHNICAL SPECIFICATION

min 137cm

D219

60 mm

PR122

Fig. 3

Fig. 4

min.

50 cm