Zanussi ZFC 22/1 L Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Lodówka Zanussi ZFC 22/1 L. Zanussi ZFC 22/1 L 10 stron. Fridge-freezer zfc 22/1 l
Drukuj stronęDoor reversibility
Unplug the appliance from the power supply before
carrying out the below-mentioned operations.
Remove the ventilation grill (D).
Unscrew the bottom hinge (E).
Remove the freezer door by releasing it from the
middle hinge (H).
Unscrew the middle hinge.
Remove the fridge door by releasing it from the top
hinge pin (A).
Remove the pin and the washer (A+B) from the top
hinge (C), then mount these on the opposite side.
Refit the fridge door.
Replace the middle hinge to the left hand side.
Replace the freezer door.
Screw down the bottom hinge (E) on the opposite
side by using the screws previously removed.
Detach the plug (F) from the ventilation grill (D). To
do this, press it in the direction of the arrow.
Introduce the plug (G), which is delivered with the
appliance, into the hole left free on the opposite side.
Re-assemble the ventilation grill (D).
Reverse the direction of the handle.
The holes which are not used are masked by plastic
plugs which should be removed and refitted onto the
free holes.
The doors can be aligned by adjusting both the
middle and top hinges.
The middle hinge can be adjusted horizontally, with
the help of a tool, after having slackened the two
screws.
The top hinge is adjusted by slackening the nut with
a 10 mm spanner and then proceeding as shown in
the Figure.
Fitting door panels
(for models equipped with door frame)
To fit the door panel, proceed as follows:
Loosen the fixing screws to remove the frame side
opposite the handle.
Loosen all the screws fixing the door frames.
Insert the panel from the side on which the frame
has been removed and push it through. Refit the
frame to the door.
14
F
F
D
D
F
F
D071
D427
D426
D405
Fig. 2
G
E
E
G
G
Fig. 3
C
B
A
Fig. 4
Fig. 5
H