Zanussi FMW 9613 Instrukcje użytkowania i pielęgnacji - Strona 16
Przeglądaj online lub pobierz pdf Instrukcje użytkowania i pielęgnacji dla Piekarnik Zanussi FMW 9613. Zanussi FMW 9613 31 stron. Built-in combination multifunction oven and microwave
Również dla Zanussi FMW 9613: Instrukcja obsługi i konserwacji (31 strony), Instrukcja obsługi i konserwacji (31 strony)
Drukuj stronę
Electronic programmer
(Fig. 7)
The programmer performs the following
functions: presetting of cooking time
when using the oven; displaying the
correct time of the day.
Symbol Reference
Function
a
A
Setting of the minute minder
and display.
To stop the buzzer.
0
B
Setting and visualizing of the
cooking period.
0
C
Setting and visualizing of the
end time of the cooking period.
(!!)
D
Manual operation
'O*
E
Setting of the times
(forward/backward)
Operation pilot lamps
The lighting up of a pilot lamp indicates
that the relevant function is operating.
Pilot
lamp
Reference
Control
•
1
General functioning
Q
2
Programme functioning
Manual operation
a
3
Automatic functioning
Fig. 7
O
o*n
ot
U U
;
O U
5
a
©
0
ABC
T
Use
Current time setting
The clock is preset to show the hours
from 1 to 24 and the minutes from 0 to
60. When first connecting the appliance
to the power supply, the numbers of the
display and the pilot lamp [[] will flash
indicating that the clock needs to be set.
To enter the current time proceed as
follows:
simultaneously depress pushbuttons
£1 (A) © (B) and turn knob
- + (E) as required until the correct hour
and minutes are entered.
The electronic clock starts when you
release pushbuttons 0 (A) and
© (B) (pilot lamp 0 off and lamp o-
switched on).
For further resetting repeat the above
sequence.
Setting the minute minder with
sound signal (buzzer)
The minute minder can be used only
with the programmer set on manual
operation (knob (D) depressed).
The maximum programmable time for
the buzzer is 23 hrs. and 59 mins.
Proceed as follows to set the minute
minder:
depress knob (D) (pilot lamp 0
switches off and lamp a- switches on);
depress pushbutton 0 (A) and at the
same time turn knob - + (E) and, set the
desired time period.
Release pushbutton (A).
16