Zanussi ZOD35561XK Podręcznik użytkownika - Strona 13
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Piekarnik Zanussi ZOD35561XK. Zanussi ZOD35561XK 20 stron. Product manaul
Drukuj stronę
acrylamides can pose a health risk. Thus, we recommend
that you cook at the lowest temperatures and do not brown
food too much.
Care and cleaning
Warning! Refer to "Safety information" chapter.
• Clean the front of the appliance with a soft cloth with
warm water and cleaning agent.
• To clean metal surfaces use a usual cleaning agent
• Clean the oven interior after each use. Thus you can re-
move dirt more easily and it does not burn on.
• Clean stubborn dirt with a special oven cleaner.
• Clean all oven accessories (with a soft cloth with warm
water and cleaning agent) after each use and let them
dry.
• If you have nonstick accessories, do not clean them
using an aggressive agents, sharp edged objects or
dishwasher. It can destroy nonstick coating!
Stainless steel or aluminium appliances:
Clean the oven door with a wet sponge only. Dry it
with a soft cloth.
Do not use steel wool, acids or abrasive materials as they
can damage the oven surface. Clean the oven control pan-
el with the same precautions
Shelf Support Rails
You can remove the shelf support rails to clean the side
walls.
Removing the shelf support rails
1
Pull the front of the
shelf support rail away
from the side wall.
Installing the shelf support rails
Install the shelf support rails in opposite sequence.
www.zanussi.com
2
Pull the rear shelf sup-
port rail away from the
side wall and remove it.
The rounded ends of the shelf support rails must
point to the front.
Oven Ceiling
You can fold down the heating element on the oven ceil-
ing to clean the oven ceiling easily.
Folding down the heating element
1.
Remove the shelf support rails.
2.
Hold the heating element with the two hands at the
front
3.
Pull it forwards against the spring pressure and out
along the support on both sides.
4.
The heating element folds down.
The oven ceiling is ready to clean.
Installing the heating element
1.
Install the heating element in opposite sequence.
Important! Install the heating element correctly on the two
sides above the support on the inner wall of the oven.
2.
Insert shelf support rails.
Oven door and glass panels
To clean the oven door remove it.
13