Zanussi ZOP37902 Podręcznik użytkownika - Strona 18

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Piekarnik Zanussi ZOP37902. Zanussi ZOP37902 24 stron. Product manaul
Również dla Zanussi ZOP37902: Podręcznik użytkownika (24 strony), Podręcznik użytkownika (28 strony)

Drukuj stronę

1. Turn the glass cover counterclockwise to

remove it.

2. Clean the glass cover.

3. Replace the oven light bulb with an appli-

cable 300 °C heat-resistant oven light

bulb.

Use the same oven lamp type.

4. Install the glass cover.

Cleaning the oven door

The oven door has three glass panels. You can

remove the oven door and the internal glass

panels to clean them.

The oven door can close if you try to re-

move the glass panels before you remove

the oven door.

Removing the oven door and the glass

panels

Open the door

fully and hold the

two door hinges.

Close the oven

door to the first

opening position

(halfway). Then pull

forward and remove

the door from its

seat.

Lift and turn the

levers on the two

hinges.

Put the door on a

soft cloth on a stable

surface.

Release the lock-

ing system to remove

the glass panels.

Carefully lift (step

1) and remove (step

2) the glass panels

one by one. Start

from the top panel.

Clean the glass panels with water and soap.

Dry the glass panels carefully.

Installing the door and the glass panels

When the cleaning is completed, install the

glass panels and the oven door. Do the above

steps in the opposite sequence.

Make sure that you put the glass panels back in

the correct sequence. The middle panel has a

decorative frame. The screen-printing zone

must face the inner side of the door. Make sure

that after the installation the surface of the

glass panel frame on the screen-printing zones

is not rough when you touch it.

Make sure that you install the top panel in the

seats correctly (refer to the illustration).

90°

Turn the two fas-

teners by 90° and re-

move them from their

seats.