Zanussi ZOS37902 Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Piekarnik Zanussi ZOS37902. Zanussi ZOS37902 32 stron.
Również dla Zanussi ZOS37902: Podręcznik użytkownika (32 strony)

Drukuj stronę

3. Push the water drawer into its initial posi-

tion.

4. Prepare the food in the correct cookware.

5. Set the temperature between 130 °C and

230 °C. Steam cooking does not give good

results in temperatures above 230 °C.

6. Empty the water tank after the steam cook-

ing is completed.

Warning! Wait a minimum of 60 minutes

after each use of the True Fan + Steam

function in order to prevent hot water from

exiting the water outlet valve.

Water Tank indicator

When the Steam cooking operates, the display

shows water tank indicator. Water tank indicator

shows the level of the water in the tank.

•

— Water tank is full. An acoustic signal

sounds when the tank is full.

•

— Water tank is half full.

•

— Water tank is empty. An acoustic sig-

nal sounds when the tank must be refilled.

If you put too much water into the tank, the

safety outlet moves the excess water to the

bottom of the oven.

Remove the water with a sponge or cloth.

Emptying the water tank

Important! Make sure that the appliance is

cool before you start to empty the water tank.

Clock functions

Symbol

Function

Minute Minder

Time of day

Duration

End

Press

again and again to change the

clock function.

To set a countdown time.

To set, change or check the time of day. Refer to "Setting the time of day".

To set how long the appliance must operate. First set an oven function be-

fore you set this function.

To set when the appliance must be deactivated. First set an oven function

before you set this function. You can use Duration and End at the same time

(Time Delay) to set the time when the appliance must be activated and then

deactivated.

1. Prepare the draining pipe (C), included in

the same package with the user manual.

Put the connector (B) onto one of the ends

of the draining pipe.

2. Put the sec-

ond end of the

draining pipe

tainer. Put it at

a lower posi-

tion than the

outlet valve

(A).

3. Open the oven door and put the connector

(B) into the outlet valve (A).

4. Push the connector again and again when

you empty the water tank.

5. Remove the connector from the valve when

the water stops flowing.

Warning! Do not use the drained water to

fill the water tank again.

The water tank can have some water when

the display shows

the water flow from the water outlet valve stops.

Description

symbol. Wait until