Zanussi FA884E Podręcznik użytkownika - Strona 11

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Spryskiwacz Zanussi FA884E. Zanussi FA884E 28 stron. Washing machine fa678e; fa878e

Drukuj stronę

• If you need to stop the machine to put in more

laundry (having selected DELAY START option

first), proceed as follows:

1. Depress START / PAUSE button.

2. Turn the dial programme selector to position "

3. Wait two or three minutes before opening the

door to give the electric locking mechanism

time to release.

4. Place the laundry in the drum.

5. Follow the normal operating sequence to select a

programme.

DELAY START OPTION CAN'T BE SELECTED

WITH

SPIN and

DRAIN programmes.

7. Programme progress display

When DELAY START option is chosen, the light

relevant to the selected delay lights up.

After the machine has started, the remaining time is

shown by the corresponding indicator light.

During programme cycle the light WASHING will

remain lit.

The light END will illuminate to indicate that the

selected programme has finished.

The light END flashes in the event of operating

problems:

• 4 flashes: door open.

• 2 flashes: problem with water draining.

• 1 flash: problem with water supply.

For more information see paragraph "Something not

working?" at the end of this booklet.

8. Spin speed selector dial or

no spin /

FA 878E

This dial allows the reduction of the final and the

intermediate spin speed or to select

RINSE HOLD options.

The speeds on the dials refer to cotton programmes.

The position 800 r.p.m. (FA878E) corresponds to

700 r.p.m. for delicates.

Position 500 r.p.m. is common for all fabrics.

•

NO SPIN: by selecting this option all the

spinning phases are turned off. To be used for

extremely delicate items. The washing machine will

add 3 rinses in the cotton programmes and 1 rinse

in the synthetics programmes.

•

RINSE HOLD: by selecting this option, the

water of the last rinse is not drained, in order to

prevent the fabrics from wrinkling. When the

programme has finished, FIN light will illuminate.

To drain the water follow these three steps:

A) Turn the programme selector dial to "

B) Select

DRAIN or

C) Press INICIO / PAUSA button.

rinse hold options

FA 678E

NO SPIN or

SPIN programme.