Zanussi FE 1026 N Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Spryskiwacz Zanussi FE 1026 N. Zanussi FE 1026 N 23 stron. Washing machine fe 1026 n

Drukuj stronę

• Drain

or Spin

Press SKIP/RESET button onxce, all the leds are off, the

display will show three blinking dashes, then press

button in order to select the desired programme. If you

wish to drain

or spin

button until the led of the desired function goes on. You

can change the spin speed by means of

then depress Start/Pause

Important! If you accidentally press the

SKIP/RESET button more than once, the display will

show three blinking dashes. To drain the water,

select any washing programme by means of the

FABRIC button, then press SKIP/RESET three

times in order to select the DRAIN position (only the

DRAIN light

will remain lit).

6-7 OPTIONS button

Press these buttons to select the following options:

• PREWASH

: select this option if you wish your

laundry to be prewashed before the main wash

(not available for wool and hand-wash cycle).

The prewash ends with a short spin at 650 rpm in

programmes for cotton and synthetic fabrics,

whereas in the programme for delicate fabrics the

water is only drained.

• ECONOMY

: this option can be selected for

cottons and synthetics lightly or normally soiled

with a temperature of 40°C or higher.

Furthermore the washing temperature will be

reduced automatically and the washing time will be

prolonged.

• QUICK WASH

: for laundry that is only slightly

soiled (not for wool

programmes).

The washing time will be reduced according to the

type of fabric and the selected temperature.

The PREWASH, ECONOMY and QUICK WASH

options cannot be selected together.

: this option can be selected

• SUPER RINSE

with all programmes except the wool

hand wash

programmes. The

machine will add 2 rinses to the selected

programme. This option is recommended for

people who are allergic to detergents, and in areas

where the water is very soft.

• EASY IRON

: selecting this button the laundry

is gently washed and spun to avoid any creasing.

In this way ironing is easier. Furthermore the

machine will perform 6 rinses instead of 3 for

cotton and 4 rinses instead of 3 for synthetics.

This function can be used for cotton and synthetic

press the SKIP/RESET

button and

and hand wash

and

fabrics. If this option is selected for cotton

programmes, the spin speed automaticaly will

reduce to 900 rpm.

The SUPER RINSE and the EASY IRON options

cannot be selected together by means of the relevant

button.

8 Display

The following pieces of information are shown on the

display:

• Three blinking dashes, when a programme is

cancelled by means of the SKIP/RESET button.

The three blinking dashes will also appear when you

press the ON/OFF button to switch the machine on,

if the previously selected cycle has been erased.

• Duration of washing programme in hours

and minutes, after you have selected a

programme.

While the programme is running (after you have

pressed the START/PAUSE button), the displayed

time value decreases by one unit every minute.

• The washing machine has stopped with water in

the tub, at the end of a programme with the

RINSE HOLD

option: this is indicated by a

flashing zero.

• The washing machine has completed the

programme: this is indicated by a blinking zero.

The zero will reappear when you switch the

washing machine on, unless the previous

programme has been erased by means of the

SKIP/RESET button.