Zanussi FE 1205 Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Spryskiwacz Zanussi FE 1205. Zanussi FE 1205 23 stron. Front-loading washing machine
Drukuj stronę
132990110•gb
17-11-2003
9:42
Use
Control panel
1 ON/OFF button
Press this button to switch the washing machine on.
Press the ON/OFF button again to switch the
machine off.
2 MAINS-ON light
This light is connected to the ON/OFF button. It
lights up when you press the button, and goes out
when you press it again.
3 FABRIC button
Press this button repeatedly to select the programme
on the basis of the type of laundry to be washed. The
light relevant to the selected programme will light up.
The washing machine will propose a temperature and
automatically select the maximum spin value provided
for the programme you have chosen. You can change
these values by operating buttons 4 and 5.
Hand wash
When you select this programme, you obtain a particularly
delicate washing, suitable for articles of clothing whose
label indicates that they must be hand-washed
4 TEMPERATURE button
Press this button repeatedly to increase or decrease
the temperature, if you want your laundry to be
washed at a temperature different from the one
proposed by the washing machine. The relevant
light will light up.
Maximum temperatures are 95°C for cotton, 60°C for
synthetic fabrics, 40°C for delicate fabrics, wool and
fabrics to be hand-washed (HAND WASH programme).
Pagina 8
.
8
Important!
By depressing
and
buttons simultaneously, the
acoustic signal is suppressed:
- by selecting any programme or option
- by wrong selection
- at the end of the cycle.
5 SPIN SPEED button
Press this button repeatedly to change the spin
speed, if you want your laundry to be spun at a
speed different from the one proposed by the
washing machine. The relevant light will light up.
Maximum speeds are:
• for cotton: 1,200 rpm;
• for synthetic fabrics, wool, and fabrics to be hand-
washed: 900 rpm;
• for delicate fabrics: 700 rpm.
RINSE HOLD position
: when you choose this
option, the machine will not drain the water of the
last rinse, so as not to wrinkle the laundry.
At the end of the cycle, the light of the
START/PAUSE button goes out, the pilot light
remains lit, to indicate that the water must be drained.
To complete the cycle, choose one of the following
options:
• Drain
:
Press SKIP/RESET button once, all the leds are off,
the display will show three blinking dashes, then press
button in order to select the desired programme.
If you wish to drain
or spin
SKIP/RESET button until the led of the desired
function goes on.
You can change the spin speed by means of
button and then depress Start/Pause
press the
.