Zanussi FE 4000 Instrukcje użytkowania i pielęgnacji - Strona 8

Przeglądaj online lub pobierz pdf Instrukcje użytkowania i pielęgnacji dla Spryskiwacz Zanussi FE 4000. Zanussi FE 4000 36 stron. Front-load washing machine
Również dla Zanussi FE 4000: Instrukcja obsługi i konserwacji (36 strony)

Drukuj stronę

Positioning and levelling

To keep vibration, noise and movement

to a minimum, it is essential that the

machine is absolutely level. Check this

with the aid of a spirit level when the

machine is in its permanent operating

position. Any adjustments needed can be

made by using the open end of the

spanner supplied to raise or lower the

two adjustable feet at the front of the

machine — you merely screw them up or

down (figure 3).

Some vibration is inevitable, especially if

mounted on a wooden floor.

Please ensure that when the appliance

is installed it is easily accessible for the

engineer in the event of a breakdown.

The plumbing connections

Your new Zanussi washing machine has

been designed to be permanently plumbed

in to your home's water supply and

drainage system. However, if this is not

possible, it may be connected to suitable

existing taps, with the drain hose

discharging into a sink.

The appliance has two inlet valves, hot

and cold, with female 3/4" BSP thread

connectors. If this connection size is not

compatible with the plumbing of the

existing installation, a variety of

connectors are available from good

hardware stores and plumbers merchants

to suit most domestic plumbing.

Any alterations to your existing plumbing

must be carried out by a competent

person, or qualified plumber.

The inlets on the back of the appliance are

colour coded, blue for cold, red for hot.

Before connecting the hoses be sure to fit

the mesh filters supplied as per diagram.

E n e

Rare

reatai

EEEN