Zanussi FE 904 NN Podręcznik użytkownika - Strona 14

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Spryskiwacz Zanussi FE 904 NN. Zanussi FE 904 NN 22 stron. Washing machine fe 904 nn

Operating sequence

Before the first wash we recommend that you pour 2

litres of water into the main wash compartment

of the detergent drawer in order to activate the ECO

valve. Then run a cotton cycle at 60°C, with the

machine empty, in order to remove any

manufacturing residue from the drum and tub.

Pour half a measure of detergent into the main wash

compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure

out the amount of detergent recommended by the

manufacturer in a graduated cup and pour it into the

main wash compartment

If you wish to carry out the prewash, pour detergent

into the appropriate compartment marked

3. Measure out the additives

If required, pour fabric softener into the

compartment marked

«MAX» mark.

without exceeding the

4.Switch the machine on

To switch the machine on, press the ON/OFF button

: the mains-on light comes on.

5. Select the desired programme/

fabric

Press the FABRIC button

select the desired programme/fabric. The relevant

light will light up.

The lights relevant to the phases that form the

programme will light up.

The light of START/PAUSE button

flashing.

6. Select the temperature

Press the TEMPERATURE button

select a temperature value different from the one

proposed by the washing machine.

The relevant light will light up.

repeatedly, in order to

will start

if you wish to