Zanussi FI 1073 Instrukcja obsługi - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Spryskiwacz Zanussi FI 1073. Zanussi FI 1073 22 stron. Washing machine fi 873 - fi 1073

4. Drain filter

he drain filter collects threads and small objects

inadvertently left in the laundry. Check regularly

that the filter is clean.

Place a container under the filter and unscrew it.

Pull out the filter.

Clean the filter under a running tap, then refit it,

screwing it fully in.

If the water is not discharged (drain pump is

blocked, filter or drain hose are clogged),

proceed as follows to empty out the machine:

pull out the plug from the power socket;

close the water tap;

if necessary, wait until the water has cooled

down;

place a bowl on the floor;

put the drain hose end into the bowl and let

the water come out.

Should it not be possible to have access to the

drain hose because, for example, the appliance

is built in the kitchen furniture, slightly loosen the

drain filter after placing a bowl on the floor, to let

the water come out slowly.

At the end screw the filter again.

P0037

P0039

If the machine is exposed to temperatures below

0°C, certain precautions should be taken.

Turn off the water tap.

Unscrew the inlet hose.

Unhook the drain hose from the rear support

and position the end of this hose and that of

the inlet hose in a bowl. Run the draining

programme until the selector dial is in the

"Stop" position.

Disconnect the appliance.

Screw the inlet hose and reposition the drain

hose.

When you intend to start the machine up

again, make sure that the room temperature

is above 0°C.

P0040