Zanussi FI 873 Instrukcja obsługi - Strona 20

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Spryskiwacz Zanussi FI 873. Zanussi FI 873 22 stron. Washing machine fi 873 - fi 1073

Problems which you can resolve yourself
Problem
n
The machine does not start up:
n
The machine does not fill:
n
The machine fills then empties
n
immediately
The machine does not empty
n
and/or does not spin:
There is water on the floor:
n
Unsatisfactory washing results
n

SOMETHING NOT WORKING

Possible cause
n
Check that the door is firmly closed.
n
Check that the machine is plugged in and
that there is power at the socket.
n
Check that the main fuse has not blown.
n
Check that the programme selector dial is
positioned correctly and that the start/stop
button has been depressed.
n
Check that the water tap is open.
n
Check that water is coming out of the tap.
n
Check that the inlet hose is not squashed or
kinked.
n
Check that the filter in the inlet hose is not
blocked.
n
Check that the door is closed.
n
The end of the drain hose is too low. Refer to
relevant paragraph in "water drainage"
section.
n
Check that the drain hose is not squashed or
kinked.
n
The drain filter is blocked. Clean it.
n
The anticrease option has been selected.
n
The laundry is not evenly distribuited in the
drum.
n
Too much detergent or unsuitable detergent
(creates too much foam) has been used.
n
Check whether there are any leaks from one
of the inlet hose fittings. It is not always easy
to see this as the water runs down the hose;
check to see if it is damp.
n
Check that the drain hose is not damaged.
n
Check that the drain filter has been refitted
correctly after cleaning.
n
Too little detergent or unsuitable detergent
has been used.
n
Stubborn stains have not been treated prior
to washing.
n
The correct temperature or programme was
not selected.
41