Zanussi FJS 1276 Instrukcja obsługi - Strona 20
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Spryskiwacz Zanussi FJS 1276. Zanussi FJS 1276 22 stron. Washing machine
Również dla Zanussi FJS 1276: Instrukcja obsługi (23 strony)
Drukuj stronęBefore contacting your local Zanussi Service Centre, please make the following checks
Problem
The machine does not start up
The machine does not fill
The machine empties as it fills
The machine does not drain or spin
The machine leaks or overflows
The machine vibrates or is noisy
20
SERVICING
Possible cause
The ON/OFF button has not been depressed
The door is not closed properly
No water is entering the machine (see: the
machine does not fill)
The selector dial is not correctly positioned
The water taps are not turned on
The water supply has been disconnected
The inlet hoses are kinked
The water pressure is too low
The water inlet filters are clogged
The door is not closed properly
The end of the drain hose is too low
The end of the drain hose is submerged in
water
Drain pipe has no vent-hole
You have selected a gentle wash cycle with the
Rinse Hold option which stops with the water of
the last rinse in the tub
The drain filter is clogged
The drain hose is kinked
The drainage system pipes are blocked
The drain hose extension is incorrect
The wash load is unbalanced. Redistribute the
load inside the drum to allow the machine to
spin.
Too much detergent
Unsuitable detergent
The inlet hoses are loose
The detergent dispenser drawer or recess is
clogged
The end of the drain hose is not securely
positioned
The drainage system pipes are blocked
The internal packing and transit bolts have not
been removed
The machine is not level
The machine is in contact with the wall or
furniture
The washing load is badly distributed
The machine is overloaded