Zanussi FL 1085 AL Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Spryskiwacz Zanussi FL 1085 AL. Zanussi FL 1085 AL 19 stron. Zanussi owners manual compact washer l 850 - fl 850 al fl 1085 - fl 1085

Drukuj stronę

USING YOUR MACHINE

WASHING 4.5 KG OF WHITE COTTON AT 95°C

Suppose you have 4.5 kg of normally dirty laundry to

wash. It is white cotton and is suitable for high tempera-

ture washing.

1 Load the laundry

P0004

2 Measure out the detergent

P0257

Pull out the detergent dispenser drawer from the control

panel. Measure out the amount of detergent required

and pour into the main wash compartment.

If you wish to carry out a programme with prewash, pour

the amount of detergent required into the «prewash»

compartment.

3 Add the fabric softener if required

P0204

4 Select the required options

Depress Half Load, Economy and/or Spin Reduction, if

desired.

5 Select the degree of soil

Turn the Quick'n'Clean selector dial to the required posi-

tion.

Open the door by pulling

the catch outward. Load

the items one at a time

and close the door.

P0205

Pour the fabric softener, if

required, into the compart-

ment marked

Do not exceed the MAX

level and then close the

drawer gently.

6 Select the required wash programme

P0215

7 Start the machine

Before starting up the machine check that:

the appliance is plugged in

the water supply taps are turned on

the drain hose is correctly and securely positioned

the door and the detergent dispenser drawer are

closed.

P0216

8 At the end of the programme

The machine stops automatically and the mains-on light

goes out.

The door is controlled by a safety device which releases

2 minutes after the end of the programme.

Switch the machine off by depressing the programme

selector dial.

When the programme has finished you are advised to

unplug the appliance and turn off the water taps.

Turn the programme

selector dial clockwise to

the required programme .

Pull the programme selec-

tor dial outwards: the

mains-on light illuminates

and the machine starts

operating.