Zanussi FL1001 Instrukcja obsługi - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Spryskiwacz Zanussi FL1001. Zanussi FL1001 27 stron. Washing machine

After the start, the indication of the remaining time

decreases by one unit every minute.

Many elements determine the duration of the

programme, e.g. the wash load, the temperature of

the incoming water, the formation of lather, etc.

These elements are recorded by the electronic

system and the indication of the remaining time is

updated accordingly.

The end of the programme is shown on the display

with a blinking zero.

Delayed start

The delayed start that was set with the button (10) is

shown on the display (max 24 hours).

The delay time value will decrease by one unit every

hour.

Incorrect option selection

If an option which is not compatible with the set wash

programme is selected, the message Err is

displayed.

This is also indicated by three sound signals and by

the corresponding lights that blink for about 2

seconds.

In case of breakdowns of the appliance, these are

indicated on the display with a special code, very

useful for the user and for the technical assistance,

e.g. "E20" (see page 26).

9 "START/PAUSE" button

This button has 3 functions:

Start – Pause – Drain

Pressing this button the selected programme is

started.

If the delayed start has been set, the countdown will

start.

Now on the display the duration of the programme or

the hours of the delayed start are blinking.

Pressing this button a programme already started can

be interrupted in any moment; pressing again the

button, the programme restarts. During the pause, the

indication on the display is blinking.

Alarm code

Start

Pause