Zanussi DTI 4725 Instrukcja obsługi - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zmywarka Zanussi DTI 4725. Zanussi DTI 4725 27 stron. Dishwasher dti 4725

Check that the WRD is not clogged with detergent

residue. If necessary, rinse it under running water

after having removed it from the basket by twisting

it anticlockwise and pulling it upwards.

Refit the dispenser by following the above

instructions in reverse order.

Fasten it back onto the support by turning it

clockwise.

Never use your dishwasher without the

WRD dispenser.

Since WRD also ensures correct

distribution of the water to the upper

spray arm, running the dishwasher

without it will impair the washing results.

External cleaning

Clean the external surfaces of the machine and

control panel with a damp cloth. If necessary use

only neutral detergents. Never use abrasive

products, scouring pads or solvent (acetone,

trichloroethylene etc...).

If you are not using the machine for any period of

time you are advised to:

Unplug the appliance and turn off the water;

Fill the rinse aid dispenser;

Leave the door ajar to prevent the formation of

any unpleasant smells;

Leave the inside of the machine clean.

Avoid placing the machine in a location where the

temperature is below 0°C. If this is unavoidable,

empty the machine, close the appliance door,

disconnect the water inlet pipe and empty it.

If you have to move the machine (moving

house etc...):

Unplug it;

Turn off the water tap;

Remove the water inlet and discharge;

Pull the machine out together with the hoses.

Avoid tilting the machine during transport.

MA06

PMC04GB