Zanussi DW400 Instrukcje użytkowania i pielęgnacji - Strona 10
Przeglądaj online lub pobierz pdf Instrukcje użytkowania i pielęgnacji dla Zmywarka Zanussi DW400. Zanussi DW400 34 stron. Dishwasher
Również dla Zanussi DW400: Instrukcja obsługi i konserwacji (34 strony), Instrukcja obsługi (34 strony)
Drukuj stronę
Waste connections
Care must also be taken over the
disposal of the waste water from the
machine. If your dishwasher is not to be
permanently «plumbed in», merely hook
the curved end of the drain hose firmly
over the edge of the kitchen sink, having
made sure that the sink is empty, and
that the waste outlet is not blocked.
Otherwise, fit a P-trap and stand-pipe
assembly like that in figure 6 (ensure the
pipe has an internal diameter of a least
38 mm (1% ins), and hook the drain hose
into that). In this case ensure that there
is an air gap between the hose and the
inside of the pipe to prevent the risk of
dirty water being syphoned back into the
machine, and check that the top of the
stand-pipe is between 300 and 900 mm
above floor level. In addition, make sure
that the stand-pipe/trap assembly
> 40mm
min
300mm min
900mm max
10
discharges into the same soil system as
the kitchen sink.
There are just two other points to bear
in mind. Firstly, with the machine in its
permanent position, do check that the
drain hose is not kinked, or squashed in
such a way as to obstruct the flow of
water. Secondly, if the drain hose
supplied with the machine is not long
enough to reach the desired discharge
point, it can be replaced with a hose of
the same internal diameter, up to 2 m
long (see your local Service Network or
installer).