Zanussi ZDT36001FA Podręcznik użytkownika - Strona 14
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zmywarka Zanussi ZDT36001FA. Zanussi ZDT36001FA 21 stron.
Drukuj stronę
2. Wash the spray arm under running water. Use
a thin pointed tool, e.g. a toothpick, to remove
particles of soil from the holes.
3. To install the spray arm back, press it
downwards.
CLEANING THE TOP SPRAY ARM
We recommend to clean the top spray arm
regularly to prevent soil from clogging the holes.
Clogged holes can cause unsatisfactory washing
results.
The top spray arm is placed on the ceiling of the
appliance. The spray arm (C) is installed in the
delivery tube (A) with the mounting element (B).
C
B
A
1. Release the stoppers on the sides of the
sliding rails of the cutlery drawer and pull the
drawer out.
1
2
14
2. Move the upper basket to the lowest level to
reach the spray arm more easily.
3. To detach the spray arm from the delivery tube,
turn the mounting element counterclockwise
and pull the spray arm downwards.
4. Wash the spray arm under running water. Use
a thin pointed tool, e.g. a toothpick, to remove
particles of soil from the holes. Run the water
through the holes to wash soil particles away
from the inside.
5. To install the spray arm back, insert the
mounting element in the spray arm and fix it in
the delivery tube by turning it clockwise. Make
sure that the mounting element locks into
place.
6. Install the cutlery drawer on the sliding rails and
block the stoppers.
EXTERNAL CLEANING
•
Clean the appliance with a moist soft cloth.
•
Only use neutral detergents.
•
Do not use abrasive products, abrasive cleaning
pads or solvents.
INTERNAL CLEANING
•
Carefully clean the appliance, including the
rubber gasket of the door, with a soft damp
cloth.
•
To maintain the performance of your appliance,
use a cleaning product designed specifically for
dishwashers at least once every two months.
Carefully follow the instructions on the
packaging of the product.
•
Do not use abrasive products, abrasive cleaning
pads, sharp tools, strong chemicals, scourer or
solvents.
•
Using short-duration programmes regularly can
cause grease and limescale buildup inside the
appliance. Run long-duration programmes at
least twice a month to prevent the buildup.