Zanussi ZGF783 ITXC Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Hob Zanussi ZGF783 ITXC. Zanussi ZGF783 ITXC 13 stron. Gas hob
Również dla Zanussi ZGF783 ITXC: Instrukcja obsługi (12 strony)
Drukuj stronęPOSSIBILITIES FOR
INSERTION
Kitchen unit with door
Proper arrangements must be taken
in designing the forniture unit, in order
to avoid any contact with the bottom
of the hob which can be heated
when
it
is
operated.
recommended solution is shown in
Fig. 16.
The panel fitted under the hob
should be easily removable to
allow an easy access if a technical
assistance intervention is needed.
Kitchen unit with oven
The hob recess dimensions must
comply the indication given in
Figs. 17 and 20 and must be
provided with brackets to allow a
continuous supply of air.
To avoid overhating, the building
in should be carried out as shown
in Figs. 18 and 19.
The hob's electric connection and
the oven's one must be carried out
separately, both for safety reasons
and to allow the oven to be easily
taken off the unit.
Hanging forniture units or hoods
must be placed at 650 mm.
minimum from the hob (Fig. 21).
In case a hood with lenght of 600
mm. is fitted over the hob, the
hanging forniture units beside the
hood must be placed at 550 mm.
minimum from the hob, to allow
the fitting and the correct use of
the lid, if required.
Fig. 20
550 min.
Fig. 16
60
The
b
a) Removable panel
b) Space possibly useful for
connections
Fig. 18
Fig. 21
a
50 cm
2
2
360 cm
Fig. 17
480
380
140
Fig. 19
2
120 cm
2
180 cm