Zanussi ZGG 643 Instrukcja obsługi - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Hob Zanussi ZGG 643. Zanussi ZGG 643 23 stron.
Również dla Zanussi ZGG 643: Instrukcja obsługi (11 strony)

Drukuj stronę

Fitting the hob to the worktop

Before fitting the hob into the cut out, an adhesive

seal must be fitted to the underside outside edge

of the hob. It is essential that no gaps are left in this

seal in order to prevent spillage near the hob

seeping into the cabinet below.

1) Remove the pan supports, the burners caps

and crowns and turn the hob upside down,

taking care the ignition candles are not

damaged in this operation.

2) Place the relevant sealing all around the glass

top edge, taking care that the sealings meet

without overlapping (Fig. 8).

3) Place the hob in the cut out, taking care of its

centring.

4) Fix the hob with the relevant screws(Fig. 9).

A) Sealing gasket

Fig. 8

Fig. 9