Zanussi ZGG 646 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Hob Zanussi ZGG 646. Zanussi ZGG 646 23 stron.
Również dla Zanussi ZGG 646: Instrukcja obsługi (9 strony)

Drukuj stronę

Maintenance and Cleaning

Before any maintenance or cleaning can be carried out, you must DISCONNECT

the hob from the electricity supply.

The hob is best cleaned whilst it is still warm, as spillage can be removed more

easily than if it is left to cool.

This appliance cannot be cleaned with steam or with a steam cleaning machine.

The pan supports

The pan supports can be removed to easily clean

the hob. After cleaning the hob, make sure the pan

supports are correctly positioned.

Pay attention when replacing the pan

supports in order to avoid scratching

the glass hob top.

If washing the pan supports by hand,

take care when drying them as the

enamelling process occasionally

leaves rough edges. If necessary,

remove stubborn stains using a paste

cleaner.

The hob top

Clean the hob while it is still warm.

Never use aggressive or abrasive agents, such as oven sprays, stain or rust removers, scouring

powders, or sponges with an abrasive effect.

Special cleaning agents and ceramic hob scrapers are available from department stores.

Slight, non-burnt soilage can be wiped off with a damp cloth. Burnt soilage has to be removed with a

scraper. Afterwards wipe off the ceramic hob with a damp cloth.

Light metallic stains (aluminium residues) can be removed from the cooking zone with a ceramic hob

cleaning agent such as Vitroclen when cool.

Sugar solutions, food stuffs with a high sugar content must be removed immediately with a scraper. If this

type of soilage is not removed immediately it can cause irreparable damage to the ceramic surface.

When the surface has cooled wipe over with a damp cloth and Vitroclen.

Before using any detergent or cleaning agent on the ceramic top, ensure they are recommended by the

manufacturer for use on ceramic hobs.

Do not apply any cleaning agents to hot cooking zones. Ensure any residues are wiped off before the

cooking zones are used again.

If scratches or cracks are noticed, disconnect the appliance from the

electrical supply to avoid the risk of electric shock and call your nearest

Service Force Centre.

Fig. 2