Zanussi ZGG 742 E Instrukcja obsługi - Strona 34

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Hob Zanussi ZGG 742 E. Zanussi ZGG 742 E 40 stron. Electronic gas hob

4. Touch the Decreasing Control

select the required type of gas.

5. After selecting the type of gas, switch

off the hob touching the main ON/OFF

Control

6. Touch the main ON/OFF Control

again

to reactivate the hob.

The appliance is automatically set to the

normal "User Mode".

7. Light all the burners and adjust their

flame to minimum, in order to check the

flame stability (visual check).

8. At the same time, check the flame

aspect (visual check).

If both the flame stability and the flame

aspect are satisfactory, the setting of the

hob for the new gas type is completed.

If the flame stability is not satisfactory, carry

out an additional adjustment as described

in the following paragraph.

Minimum flame adjustment

If the flame stability and the flame aspect

are not satisfactory, proceed as follows:

1. Carry out the steps described in the

paragraph "Setting the hob for the new

gas type" - points 1, 2 , 3 and 4.

2. Light the burner to be adjusted following

the instructions given in the paragraph

"How to light a burner".

The burner is automatically set to the

minimum flame level.

3. If the flame minimum level is too low, the

burner

extinguishes.

automatically carries out a minimum

level adjustment and then relights the

burner.

The

hob