Zanussi ZGG35214 Podręcznik użytkownika - Strona 13

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Hob Zanussi ZGG35214. Zanussi ZGG35214 20 stron.
Również dla Zanussi ZGG35214: Podręcznik użytkownika (16 strony), Podręcznik użytkownika (28 strony), Podręcznik użytkownika (16 strony)

To replace the connection cable use

only H03V2V2-F T90 or equivalent

type. Make sure that the cable

section is applicable to the voltage

load and the working temperature.

The yellow/green earth wire (B)

must be approximately 2 cm longer

than the live and neutral wire (A).

1. Connect the green and yellow (earth) wire

to the terminal which is marked with the

letter 'E', or the earth symbol

coloured green and yellow.

2. Connect the blue (neutral) wire to the

terminal which is marked with the letter 'N'

or coloured blue.

3. Connect the brown (live) wire to the

terminal which is marked with the letter 'L'. It

must always be connected to the network

phase. There must be no cut or stray

strands of wire present. The cord clamp

must be correctly attached to the outer

sheath.

Assembly

www.zanussi.com

, or

min. 650 mm

40-50 mm

55 mm

30 mm

50 mm

If a furniture unit is installed at a

distance of 400 mm above the

hob, there must be a minimum

safety distance of 50 mm to the

left or right from the edge of the

hob.

490 mm

270 mm

400 mm