Zanussi ZGG62414XA Podręcznik użytkownika - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Hob Zanussi ZGG62414XA. Zanussi ZGG62414XA 16 stron. Product manaul
Również dla Zanussi ZGG62414XA: Podręcznik użytkownika (49 strony), Podręcznik użytkownika (20 strony)
Drukuj stronę
Problem
The flame is blow out immediately
after ignition
The gas ring burns unevenly
If there is a fault, first try to find a solution to the
problem yourself. If you cannot find a solution to
the problem yourself, speak your dealer or the
local Service Force Centre.
If you operated the appliance incorrectly,
or the installation was not carried out by a
registered engineer, the visit from the customer
service technician or dealer may not take place
free of charge, even during the warranty period.
These data are necessary to help you
quickly and correctly. These data are
available on the supplied rating plate.
• Model description .................
1
MOD.
PROD.NO.
SER.NO
DATA
MODEL
Stick it on Guarantee Card and send this
1
part
Stick it on Guarantee Card and keep this
2
part
8
Possible cause
• Burner cap and crown are
placed uneven
• Thermocouple is not heated
sufficient
• Burner crown is blocked with
food residues
2
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
MODEL
• Make sure that the burner cap
• After lightning the flame, keep
• Make sure that the injector is
• Product number (PNC) .................
• Serial Number (S.N.) .................
Use the original spare parts only. They are
available at Service Force Centre and approved
spare parts shops.
Labels supplied with the accessories bag
Stick the adhesive labels as indicated below:
3
MOD.
PROD.NO.
0049
SER.NO.
Stick it on instruction booklet
3
Remedy
and crown are in correct posi-
tions.
the knob pushed for approxi-
mately 5 seconds.
not blocked and the burner
crown is clear of food particles.
TYPE
230V-50Hz
IP20
www.zanussi.com