Zanussi ZGS 322 Instrukcja obsługi - Strona 20

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Hob Zanussi ZGS 322. Zanussi ZGS 322 32 stron. Gas hob

Electrical Connections

Any electrical work required to install this hob should be

carried out by a qualified electrician or competent person,

in accordance with the current regulations.

THIS HOB MUST BE EARTHED.

Electrical Requirements

The manufacturer declines any liability should these safety measures

not be observed.

This hob is designed to be connected to a 230 V 50 Hz AC electrical

supply.

Before switching on, make sure the

electricity supply voltage is the same as

that indicated on the hob rating plate. The

rating plate is located on the bottom of

the hob. A copy is attached on the back

cover of this book.

The hob is supplied with a 3 core flexible

supply cable.

This has to be provided with a proper plug,

able to support the load marked on the

identification plate. To connect

the plug to the cable, follow the

recommendation given in Figu-

re. The plug has to be fitted in

a proper socket.

In the event of having to change the fuse, a 3amp ASTA approved (BS 1362)

fuse must be used.

Should the plug need to be replaced for any reason, the wires in the mains

lead are coloured in accordance with the following code:

Green and Yellow

Blue

Brown

— Connect the green and yellow (earth) wire to the terminal in the

plug which is marked with the letter 'E' or the earth symbol

coloured green and yellow.

Min. size Cable/flex

0.75 mm

- Earth

- Neutral

- Live

Earth (yellow/green)

Cable / flex type

H05 V2V2-F (T90)

Neutral

Fuse

3 A