Zanussi ZGS 682 ICT Instrukcja obsługi - Strona 20

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Hob Zanussi ZGS 682 ICT. Zanussi ZGS 682 ICT 36 stron. Zanussi gas hob instructions booklet

Fitting the Hob into the

Worktop

Carry out the building in of the hob as

follows:

1. place the seals supplied with

the hob on the front edge of the

cut out. Then, place them at 11

mm from the side edges and at

10 mm from the rear edge, as

shown in the diagram, taking

care that the seals meet without

overlapping.

2. place the hob in the cut out,

taking care that it is centred;

3. fix the hob with the relevant

fixing clamps and screws, as

shown in the diagram. When the

screws have been tightened,

the excess seal can be

removed.

The edge of the hob forms a double seal

which prevents the ingress of liquids.

Seal