Zanussi ZIAN844K Podręcznik użytkownika - Strona 18
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Hob Zanussi ZIAN844K. Zanussi ZIAN844K 24 stron.
Drukuj stronę
Problem
and
appear alternately.
and
appear alternately.
and
appear alternately.
You hear a beep sound, the indi‐
cators above
blink and Boil‐
Assist does not start.
and a number come on.
You can hear a constant beep
noise.
8.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre. Give the data
from the rating plate. Give also three digit
letter code for the glass ceramic (it is in the
corner of the glass surface) and an error
9. TECHNICAL DATA
9.1 Rating plate
Model ZIAN844K
Typ 62 D4A 01 AA
Induction 7.35 kW
Ser.Nr. .................
ZANUSSI
18
ENGLISH
Possible cause
The power is too low due to unsuita‐
ble cookware or an empty pot.
The pot is empty or contains some
liquid other than water, e.g. oil.
There is too much or too little water
in the pot.
You boiled some food other than wa‐
ter and potatoes. The boiling point
was moved in time and BoilAssist
could not work properly.
None of the cooking zones is ready
to be used with BoilAssist. There is
some residual heat on the cooking
zones you want to choose or they
are still in use.
There is an error in the hob.
The electrical connection is incor‐
rect.
message that comes on. Make sure, you
operated the hob correctly. If not the
servicing by a service technician or dealer
will not be free of charge, also during the
warranty period. The information about
guarantee period and Authorised Service
Centres are in the guarantee booklet.
PNC 949 595 753 00
220 - 240 V / 400 V 2N 50 - 60 Hz
Made in Germany
7.35 kW
Remedy
Use the appropriate type of cookware.
Refer to "Hints and Tips" and "Techni‐
cal Data".
Do not activate any zone with an emp‐
ty pot on it.
Avoid using the function with liquids
other than water.
Only boil water and potatoes with the
use of BoilAssist. Refer to "Hints and
Tips".
Finish your previous cooking activities
and choose a free cooking zone with‐
out any residual heat.
Deactivate the hob and activate it
again after 30 seconds. If
on again, disconnect the hob from the
electrical supply. After 30 seconds,
connect the hob again. If the problem
continues, speak to an Authorised
Service Centre.
Disconnect the hob from the electrical
supply. Ask a qualified electrician to
check the installation.
comes